Either semester. Three credits. Three class periods and one discussion period. Prerequisite: MATH 211 and PHYS 152, both of which may be taken concurrently. Open to sophomores. This course and EE 220 may not both be taken for credit. Enderle, Jordan

Analysis of electrical networks incorporating passive and active elements. Basic laws and techniques of analysis. Transient and forced response of linear circuits. Periodic excitation and frequency response.

Either semester. Three credits. Three class periods and one discussion period. Prerequisite: EE 201 or EE 220. Bar-Shalom, Luh, Pattipati

Representation of signals in the time and frequency domains. Fourier series. Fourier and Laplace transform methods for analysis of linear systems. Introduction to state space models. Introduction to sampling and discrete systems analysis via z transforms.

Either semester. Three credits. Prerequisite: EE 201. This course and EE 239 may not both be taken for credit. Anwar, Donkor

Physical electronics underlying the operation of modern solid-state devices. Diodes and diode circuits. The bipolar junction transistor and field-effect transistors. Models of transistors. Applications of transistors to integrated circuits such as operational amplifiers and logic gates.

Either semester. Three credits. Prerequisite: PHYS 152 and MATH 210 and 211. Not open for credit to students who have received credit for EE 206. Bansal

Application of electric and magnetic field theory to engineering problems involving conductors, dielectrics, semiconductors, magnetic materials, the motion of charged particles, and wave propagation. Relationship between fields and circuit parameters in the context of transmission lines and radiation.

First semester. Three credits. Prerequisite: EE 201. This course and EE 205 cannot both be taken for credit. Bansal

Electrostatics and the behavior of charged particles in an electric field; capacitance and energy storage. Magnetostatics, magnetic materials and circuits; Ampere's law and the Biot-Savart law. Maxwell's equa-tions. Behavior of transformers and their applications in circuits. Principles of electromechanical devices.

Second semester. Three credits. Prerequisite: EE 205 or EE 206. Bansal

Time- and space-varying solutions to Maxwell's equations. Plane wave propagation; reflection and refraction. Transmission lines in steady-state and with transients; impedance matching. Principles of propragation in waveguides, both metal (microwave) and dielectric (optical). Radiation and antennas.

Either semester. Two credits. One 2-hour laboratory period and one 1-hour discussion period. Prerequisite: EE 201, which may be taken concurrently. Open to sophomores. Donkor

Design and evaluation of analog electrical and electronic circuits. Emphasizes out-of-laboratory preparation and troubleshooting. Introduction to laboratory instruments including oscilloscopes, signal sources and meters.

Semester by arrangement. Three credits. Prerequisite: EE 204 and CSE 207. Ayers, Fox

Switching, timing, wave shaping, and logic circuits to generate waveforms and functions used in pulse systems, instrumentation and computers. Emphasis is on integrated circuits.

First semester. Three credits. Prerequisite: MATH 210 and 211, which may be taken concurrently, and PHYS 152. This course and EE 201 may not both be taken for credit.

Basic concepts of circuit analysis as applied to electronic circuits and electromechanical devices, including measuring instruments.

Semester by arrangement. Three credits. Prerequisite: EE 202 and EE 206 or consent of instructor.

Equivalent circuits and characteristics of multiphase transformers. Per-unit system. Analysis of balanced conditions on multiphase power systems. Principles of a-c and d-c machinery and other electromechanical devices, emphasizing dynamic characteristics. Applications to power and control systems.

Second semester. Three credits. Prerequisite: EE 204, which may be taken concurrently. Anwar

Fundamental physical processes underlying the operation of modern electronic devices. P-n junctions, bipolar and field-effect transistors, and solar cells. Electrical conduction in solidstate and gaseous electronic devices.

First semester. Three credits. Prerequisite: EE 205 or EE 207 or PHYS 255. Bansal, Cheo

Application of Maxwell's equations and geometric optics first to two-dimensional dielectric waveguides and then to cylindrical fibers. Ray and mode theory, eigenvalues, Goos-Haenchen shift. Step-index, graded-index, and single-mode fibers. Splicers, couplers, sources, detectors and optical design. Fiber manufacturing techniques.

Second semester. Three credits. One four-hour laboratory period. Prerequisite: EE 228. Bansal, Cheo

Hands-on design and measurement of fiber-optic applications. Fiber-optic communications and fiber-optic sensors. Structured experiments and design projects centered around available equipment.

First semester. Three credits. Prerequisite: EE 202, EE 204 and CSE 207. Fox

Measurements of physical quantities by means of electrical circuits and electronic instruments. Analysis of measurement systems using equivalent circuits. Methods of measuring signals in the presence of noise. Use of computers in measurement systems. Recording and display devices.

Either semester. Three credits. Prerequisite: EE 202. Pattipati, Soulsby

Modeling and analysis of physical systems using frequency and time-domain methods. State variable techniques for continuous and discrete-time systems. Controllability and observability. Stability of linear systems with feedback; root locus, Bode and Nyquist methods. Linearization of nonlinear systems. Computational methods for analysis of linear systems.

First semester. Three credits. Prerequisite: EE 232. Pattipati

Design of linear feedback control systems emphasizing stability, accuracy, dynamic response, and sensitivity to parameter variations. Frequency domain compensation methods. State variable design techniques and use of observers. Lyapunov stability theory. Linear optimum control. Use of computer for simulation and design.

Second semester. Three credits. Prerequisite: EE 232. Jordan, Pattipati

Analysis and design of control systems incorporating digital computers. Building blocks of digital control. Methods of control algorithm design. Alternate control strategies. System integration. Experimental design project.

Second semester. Three credits. Prerequisite: EE 201 or 220. This course and EE 204 may not both be taken for credit.

Analysis of basic electronic and electromechanical components and circuits with design applications in instrumentation, communications and control.

Second semester. Three credits. Prerequisite: EE 204 and 232. Fox

Analysis and design of linear amplifiers. The effects of feedback in tuned, video, and operational amplifiers. Noise, stability, and frequency compensation. Applications encompass active filters, oscillators, phase lock loops and nonlinear operations such as multiplication, modulation, sampling, and analog-to-digital conversion.

First semester. Three credits. Prerequisite: EE 202, and STAT 224Q or consent of instructor. Tong, Willett

Communication of information over noisy channels. Fourier transform review, spectral analysis, and sampling. Amplitude, phase, and frequency modulation of a sinusoidal carrier. Time and frequency division multiplexing. Random processes and analysis of communication of systems in noise. Elements of digital communication systems.

Second semester. Three credits. Prerequisite: EE 202 and STAT 224Q or consent of instructor. Willett

Fundamentals of digital communication systems. Encoding of analog signals for digital transmission. Basic information theory. Source encoding techniques. Baseband data transmission. Digital carrier modulation schemes. Multiplexing techniques. Basic error control coding.

Second semester. Three credits. Prerequisite: EE 204 or consent of instructor. Anwar, Jain

Principles and applications of contemporary solid state devices such as light-emitting diodes, injection lasers, solar cells, p-n-p-n diodes, SCR and Triacs, IMPATT diodes, Schottky devices, bipolar and MOS transistors, MESFETs and MODFETs, and fundamentals of integrated circuits.

Semester by arrangement. Three credits. Prerequisite: EE 205 or EE 206.

Complex permittivity and permeability of isotropic materials. Polarization and magnetization. Ferroelectric and ferromagnetic materials. Electrostriction and magnetostriction. The Meissner effect and superconducting magnets. Engineering applications.

Second semester. Three credits. Prerequisite: EE 202. Javidi, Willett

Discrete-time signals and systems. The z-transform. Digital filters; stability, frequency response, canonic realizations and state equations. Fourier methods for discrete signal representation; Fourier transform of sequences, the discrete Fourier transform, and the FFT. Design of linear digital filters in time and frequency domains. Spectrum analysis and filtering via the FFT.

First semester. Four credits. Two-hour lecture and three-hour laboratory period. Prerequisite: EE 215 or consent of instructor, and EE 245. Not open for credit to students who have passed EE 248 or EE 269. Jain

Design of MOS transistors, including short channel effects in sub-micron devices; scaling laws; fabrication technologies. Layout of NMOS and CMOS logic gates; power-delay calculations. Design of static and/or dynamic memories. Laboratory emphasizes schematic capture, simulation, timing analysis; layout of custom IC's; use of VHDL; scaling laws and design of 0.25 micro circuits.

(Also offered as CSE 252.) Either semester. Three credits. Prerequisite: CSE 243 or both CSE 240 and CSE 241. Not open for credit to students who have passed CSE 252.

Design and evaluation of control and data structures for digital systems. Hardware design languages are used to describe and design alternative
register transfer level architectures and control units with a microprogramming emphasis. Consideration of computer architecture, memories, digital interfacing, timing and synchronization, and microprocessor systems.

(Also offered as CSE 257.) Either semester. Three credits. Prerequisite: Either CSE 110C or CSE 130C or ENGR 150C and MATH 210Q and 211Q or consent of instructor. Soulsby

An Introduction to the numerical algorithms fundamental to scientific computation. Equation solving, function approximation, integration, difference and differential equations, special computer techniques. Emphasis is placed on efficient use of computers to optimize speed and accuracy in numerical computation. Extensive digital computer usage for algorithm verification.

Either semester. Three credits. One class period and one 4-hour laboratory period. Prerequisite: CSE 208W, EE 209W, EE 202 and EE 204, which may be taken concurrently or consent of instructor. Anwar, Ayers

Introductory design laboratory. Use of personal computers to design and measure performance of analog electronic circuits and systems. Design with both integrated circuits and discrete components. Design of active filters, effects of feedback, broadbanding, oscillator design, A/D and D/A conversion systems, and low-noise amplifier design.

Either semester. Three credits. One class period and one 4-hour laboratory period. Prerequisite: EE 261. Ayers

Intermediate design laboratory. Solution of practical design problems in electronic circuits, control systems, digital systems, physical electronics, biomedical electronics and power systems.

Either semester. Three credits. One 4-hour laboratory. Prerequisite: EE 207 and EE 262, which may be taken concurrently. Donkor

Design and experimental evaluation of circuits and systems useful in control, communication, and other applications. Rotating machines, servomechanisms, transducers, transmission lines, antennas, oscillators, modulation and detection, wave shaping and switching circuits.

Either or both semesters. Three credits. Prerequisite: EE 262 and consent of instructor. May be taken twice for credit.

Experimental design project undertaken by the student by special arrangement with a faculty member of the Department of Electrical & Systems Engineering.

First semester. Three credits. One class period and one 4-hour laboratory. Prerequisite: EE 262, and EE 232 which may be taken concurrently. Fox

Design of software and interface hardware to use a microcomputer as an on-line, real-time element in data acquisition, filtering and control systems. Use of clocks, DAC's, ADC's, speech synthesis modules, and movement generators. Design project. Written and oral presentations of laboratory results

Second semester. Three credits. One 4-hour laboratory period. Prerequisite: EE 232 and EE 262. Jordan, Willett

Real-time digital control and signal processing systems. Typical topics include liquid level control, velocity and position control, digital filters, image processing, and power control electronics. Written and oral presentations of laboratory results.

Second semester. Three credits. One class period, and one 4-hour laboratory period. Prerequisite: EE 245, EE 215 or consent of instructor. Anwar, Jain

Semiconductor wafer preparation and characterization including: determination of carrier concentration, mobility, and lifetime; oxidation, diffusion, metallization, mask layouts, and photolithographic techniques as employed in the realization of discrete devices (e.g., bipolar and MOS transistors, solar cells) and integrated circuits; design of basic IC components such as transistors, resistors, and capacitors; monolithic fabrication of simple digital/analog circuits. Design project. Written and oral presentations of laboratory results.

Semester by arrangement. Three credits. Prerequisite: EE 232.

Analysis of human physiological control systems and regulators through the use of mathematical models. Identification and linearization of system components. System interactions, stability, noise, and the relationship of system malfunction to disease. The analysis and design of feedback systems to control physiological states through the automatic administration of drugs.

First semester. Three credits. Prerequisite: BIOL 107. Co-requisite: PHYS 151Q and MATH 210Q. Open to sophomores. Fox

Survey of the ways engineering and medical science interact. The art and science of medicine, and the process of medical diagnosis and treatment. Diagnostic instrumentation and measurements including medical imaging. Introduction to bioelectric phenomena, biomechanics, and biomaterials. Biochemical engineering. Computers in medicine. Molecular medicine and biotechnology.

(Also offered as CSE 280.) Either semester. Three credits. Four hour laboratory period. Prerequisite: CSE/EE 252 which may be taken concurrently.

Digital designing with PLA and FPGA, A/D and D/A conversion, floating pt, processing, ALU design, synchronous and asynchronous controllers, control path; bus master; bus slave; memory interface; I/O interface, Logic circuits analysis, testing, and trouble shooting, PCB; design and manufacturing.

(Also offered as CSE 261.) Second semester. Three credits. One 4-hour laboratory period. Prerequisite: CSE 208W, CSE 240 and CSE 241, or CSE 243 ,and CSE/EE 280. Recommended preparation: CSE/EE 252. Barker

Advanced combinational and sequential circuit design and implementation using random logic and microprocessor based system. Hardware and software interface to the basic system. Serial communication, user program loading and execution. Microcontrollers - familiarization and inclusion in design.

(Also offered as CSE 290.) Either semester. Two credits. Prerequisite: This course is taken by seniors in the semester before EE 291. (Formerly offered as EE
297.) Enderle, Jordan

Discussion of the design process; project statement, specifications, project planning, scheduling and division of responsibility, ethics in engineering design, safety, environmental considerations, economic constraints, liability, manufacturing, and marketing. Projects are carried out using a team-based approach. Selection and analysis a of design project to be undertaken in CSE/EE 291 is carried out. Written progress reports, a proposal, an interim project report, a final report, and oral presentations are required.

(Also offered as CSE 291.) Either semester. Three credits. Prerequisite: EE 290. Hours to be arranged. (Formerly offered as EE 270.) Enderle, Jordan

Design of a device, circuit, system, process, or algorithm. Team solution to an engineering design problem as formulated in CSE/EE 290, from first concepts through evaluation and documentation. Written progress reports, a final report, and oral presentation are required.

Semester by arrangement. Credits by arrangement. Prerequisite: Announced separately for each course. With a change in content, this course may be repeated for credit.

Classroom and/or laboratory course in special topics as announced in advance for each semester.

Semester by arrangement. Credits by arrangement, not to exceed four in any semester. Prerequisite: Consent of instructor. With a change in content, this course may be repeated for credit.

Individual exploration of special topics as arranged by the student with course instructor.